Aparte de tener problemas de software la PS4 también tiene problemas de hardware. Cuando se encuentra en una superficie plana el botón de expulsión de CD se presiona solo. Les traigo una solución permanente.

 

Lo que pasa es que el botón de expulsión (#3 en la foto) se presiona solo y causa que el disco que este adentro salga y luego evita que entre cualquier otro disco. Mi tabla, la Auto-Eject Glitch Fixing Base, mantiene el botón (#1 en la foto) suspendido en el aire y evita que sea presionado por el mismo. También suspende las gomas de estabilidad (#1 y #2 en la foto) para mayor estabilidad. Aquí está como lo hice:

1. Cortar una tabla de 275 mm por 305mm (dimensiones de la PS4)

2. Comparar con la PS4 y marcar donde se encuentran las gomita y el botón

3. Con una broca de madera de 7/8 hacer 4 hoyos donde correspondan según las marcas conseguidas

4. Cortar hasta los huecos

5. Lijar

 

————————————————————————————————————————–

(English Version)

Aside from having software problems the PS4 also has hardware problems. When you are on a flat surface the CD eject button is pressed by itself. I bring a permanent solution.

 

What happens is that the eject button (# 3 in the photo) is pressed alone and causes the disc that is inside to come out and then prevents you from putting any other disk in. My base, the Auto-Eject Glitch Fixing Base maintains the button (# 1 in picture) suspended in the air and prevents it from being pressed by itself. Also it suspends the other stability plastics (# 1 and # 2 in the photo) for further stability. Here is how I did it:

1. Cut a table of 275 mm by 305 mm (dimensions of PS4)

2. Compare with the PS4 and mark where the stability gums and button are.

3. Wood drill 4 holes with a 7/8 wood tool where the marks you got are

4. Cut up to the holes

5. Sand wood

  • Si quieren encargar una, contactenme por mi email, cuesta $10. If you want to order one, contact me by my email, it's $10

  • Ecuador